APC 1.1KVA 230V BACK-UPS (BX1100C-IN)

Specification

Output
Output power capacity	660Watts / 1.1 kVA
Max Configurable Power (Watts)	660Watts / 1.1 kVA
Nominal Output Voltage	230V
Efficiency at Full Load	72.0 %
Output Frequency (sync to mains)	50 Hz
Topology	Line Interactive
Waveform type	Stepped approximation to a sinewave
Transfer Time	10ms typical : 12ms maximum
Input
Nominal Input Voltage	230V
Input frequency	45 – 65 Hz (auto sensing)
Input Connections	India 3-pin 6A
Cord Length	1.52meters
Input voltage range for main operations	145 – 290V
Number of Power Cords	1
Efficiency at Full Load	72.0 %
Batteries & Runtime
Battery type	Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time	6hour(s)
Communications & Management
Control panel	LED status display with On Line : On Battery : Replace Battery and Overload indicators
Audible Alarm	Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
Surge energy rating	255Joules
Physical
Maximum Height	282mm , 28.2cm
Maximum Width	132mm , 13.2cm
Maximum Depth	259mm , 25.9cm
Net Weight	8.98kg
Shipping weight	10.21kg
Shipping Height	394mm , 39.4cm
Shipping Width	203mm , 20.3cm
Shipping Depth	384mm , 38.4cm
Color	Black
Environmental
Operating Environment	0 – 40 °C
Operating Relative Humidity	0 – 95 %
Operating Elevation	0-3000meters
Storage Temperature	-15 – 45 °C
Storage Relative Humidity	0 – 95 %
Storage Elevation	0-15000meters
Audible noise at 1 meter from surface of unit	45.0dBA
Warranty	1 Year
Note	***Features, Price and Specifications are subject to change without notice.

Features

Audible alarms

Provides notification of changing utility power and UPS power conditions

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Automatic Voltage Regulation (AVR)

Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Battery charging indicator

Lets you know when your battery is charging and when it is fully charged.

Battery Saver

Extends battery life by preventing unnecessary discharges while the UPS is on battery.

Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Cold-start capable

Provides temporary battery power when the utility power is out.

Fast battery charging capability

Allows for reduced battery recharge time, prevents disturbances on the distribution system by correcting the power factor, protects the battery against damage caused by deep discharge and provides backfeed protection.

Generator compatibility

Allows you to recharge your battery while on generator power.

LED Indicators

Provide easy-to-read status of the unit and utility power conditions.